www.sunled.com part number: LMR12WD t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4794 v3 checked : b.l.liu p.1/4 features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. absolute maximum ratings (t a =25c ) mr (gaalas) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 155 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds c lead solder temperature [5mm below package base] 260c for 5 seconds notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice. mr (gaalas) unit forward voltage (typ.) (i f =20ma) v f 1.85 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 660 nm wavelength of dominant emission (typ.) (i f =20ma) d 640 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LMR12WD red gaalas water clear 900 1690 660 20
www.sunled.com part number: LMR12WD t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4794 v3 checked : b.l.liu p.2/4 ? mr
www.sunled.com part number: LMR12WD t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4794 v3 checked : b.l.liu p.3/4 remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: LMR12WD t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4794 v3 checked : b.l.liu p.4/4 packing & label specifications LMR12WD
|
